logo, part1INDUSTRIAL CHEM LABS & SERVICESlogo,part 2

 

Tower Treat S
Scale and corrosion inhibitor for soft water EPA Approved

This liquid scale and corrosion inhibitor is specifically formulated for open recirculating cooling tower systems in areas of low hardness, low alkalinity and highly corrosive scaling waters. It also contains an additional polymer dispersant designed to ensure sludge and scale are easily removed from the system through a regular bleed-off program.

 

Effective Against

·         Scale

·         Corrosion

·         Carbonate deposits

·         Mineral deposits

·         Lime

·         Rust

 

 

Features and Benefits

·         Specifically designed as a treatment for open recirculating systems using highly corrosive, soft make-up water.

·         Restores heat transfer efficiency for systems using soft water.

·         Contains no chromate or zinc and is recommended where extremely low pollution potential is required.

·         Is completely compatible with other cooling tower maintenance products such as biocides and biodispersants.

 

Directions Complete directions on product label

Recommended for use with an automated continuous feed systems. Feed 40 - 64 ounces per 1,000 gallons of cooling water capacity. Maintain a residual molybdate level of between 1.2 and 3.0 ppm. May be used with algaecide and biocide treatment.

 

Safety

Warning: Harmful if swallowed. May cause severe burns. Keep out of the reach of children.

 

Properties

Appearance......................... Yellow liquid

Fragrance............................ Mild odor

Specific gravity…………... 0.110

pH....................................... 12.5-13.0

Flash point.......................... >212 ºF

 

Active Ingredients

CAS Number

Water

7732-18-5

Potassium Hydroxide

1310-58-3

Acrylate Polymer

Proprietary

Phosphoric acid

7664-38-2

Sodium Molybdate

7631-95-0

 

 




 
Home | Products | MSDS | Forms | Contact | Login | Register | Admin Interface