logo, part1INDUSTRIAL CHEM LABS & SERVICESlogo,part 2

 

Rust Converter
Changes Rust Into An Inert, Protective Coating EPA Approved

This aerosol surface conditioner and primer changes existing rust into a dark, inert protective polymeric coating that seals out moisture and prevents future rust and corrosion. It also provides an excellent primer coating on rusty steel and iron for the application of oil-based paints. Once painted, it helps surfaces resist the effects of the weather without peeling or cracking.

 

Use On:

Ψ       Trucks and autos

Ψ       Play equipment

Ψ       Machinery Boats

Ψ       Marine docks

Ψ       Storage tanks

Ψ       Doors and gates

 

 

Features and Benefits

Ψ       Converts rust into a stable, paintable surface.

Ψ       Eliminates the need for scraping, sandblasting or priming rusty surfaces.

Ψ       Protects further rusting on surfaces exposed to rain, sun and salt spray.

 

Directions Complete directions on product label

For best results, prepare surface by brushing the loose rust from the surface using a wire brush or sand paper. Spray two thin coats onto the surface. After the surface has dried, it will turn black. Allow 48 hours to completely cure before painting. For long lasting protection, seal with two coats of a high quality oil-based paint. Do not apply if the surface temperature is below 50ΊF. Store in a cool dry place, protect from freezing or temperatures above 100ΊF.

 

Safety:

Danger: extremely flammable. May cause burns to eyes skin and respiratory tract. Keep out of the reach of children.

NFPA RATINGS

Flammability

Health Reactivity

 

Properties

Appearance......................... Brown Aerosol

Fragrance............................ Solvent

Specific gravity................... 0.74

VOC content....................... 35-40% by wt.

Solubility............................ Complete in water

Spray Pattern…………….. Spray

Extension Tube…………... No

 

Active Ingredients CAS Number

Acetone …………………………………………………………………………………………………………. 67-64-1

Isopropanol …………………………………………………………………………………………………… 67-63-0

Ethylene Glycol ………………………………………………………………………………………………… 107-21-1

Tannic Acid …………………………………………………………………………………………………… 1404-55-4

Oxalic acid …………………………………………………………………………………............................. 144-62-7




 
Home | Products | MSDS | Forms | Contact | Login | Register | Admin Interface